INDUCTION HEATER IH 250 (model IH 250-A-2-1-1)

Basic delivery set:
1. Induction heater cabinet
2. Inductor
3. Step-by-step feeding device
4. Chain conveyor
5. Mechanism for feeding billets into the inductor
6. Mechanism for removing billets inside the inductor
7. Mechanism for unloading the inductor
8. Separating mechanism
9. Pyrometer
10. Frequency converter
11. Electric equipment cabinet
12. Control board

Delivery set includes:
Operations manual
Inductor drawings
Set of spare parts

OPERATING CHARACTERISTICS
Operation mode is automatic, according to programmed requirements
Output capacity – 550-630 kg/hour
Maximum power – 250 kW
Supply voltage – 380 V
The billets are heated automatically in specified temperature interval
Maximum heating temperature – 1300 °C
Readjustment time with inductor exchange – 1 hour
Cooling water pressure – 0,3-0,4 MPa
Water flow for cooling – 9 m³/hour
Compressed air pressure – 0,4-0,5 MPa
Compressed air consumption – 1,2 m³/min
Weight 3,2 tons
Floor space covered 11,4 m², is based on 300 mm thick concrete bottom

THE INDUCTION HEATER IS EQUIPPED WITH
Software control system on the base of “OMRON”, “Siemens” processors and others
Protection system preventing billets welding in the inductor
Billets heating temperature control system
Billets separating system according to the temperature
System protecting induction coil from overheating
Billets heating temperature automatic control system
Feeding system providing specified length feed into the inductor

ADDITIONS TO BASIC DELIVERY SET
Inductors
Device for transporting heated billets
Smooth feeding system of the billets into the inductor
Tipping device for workshop containers

SERVICE
Induction heater installation and adjustment at the customer’s premises
Personnel training at equipment operation