INDUCTION HEATER IH 800 (model IH 800-A-1-2-2)

Basic delivery set:
1. Induction heater cabinet
2. Inductor
3. Step-by-step feeding device
4. Vibration exciter for feeding
5. Chain conveyor
6. Mechanism for feeding billets into the inductor
7. Mechanism for unloading the inductor
8. Pyrometer
9. Frequency converter
10. Electric equipment cabinet
11. Control board
12. Hydraulic actuator
13. Pneumatic actuator

Delivery set includes:
Operations manual
Inductor drawings
Set of spare parts

ITEM DIMENSIONS
Diameter – 65-150 mm
Length up to 400 mm

OPERATING CHARACTERISTICS
Operation mode is automatic, according to programmed requirements
Output capacity 1800-2000 kg/hour
Maximum power – 800 kW
Supply voltage – 380 V
The billets are heated automatically in specified temperature interval
Maximum heating temperature – 1300 °C
Readjustment time with inductor exchange – 1 hour
Cooling water pressure 0,3-0,4 MPa
Water flow for cooling 18 m³/hour
Compressed air pressure 0,4-0,5 MPa
Compressed air consumption – 1,5 m³/min
Weight 3,9 tons
Floor space covered 36 m², is based on 300 mm thick concrete bottom

THE INDUCTION HEATER IS EQUIPPED WITH
Software control system on the base of “OMRON”, “Siemens” processors and others
Protection system preventing billets welding in the inductor
Billets heating temperature control system
Billets separating system according to the temperature
System protecting induction coil from overheating
Billets heating temperature automatic control system

ADDITIONS TO BASIC DELIVERY SET
Inductors
Device for transporting heated billets
Smooth feeding system of the billets into the inductor
Tipping device for workshop containers

SERVICE
Induction heater installation and adjustment at the customer’s premises
Personnel training at equipment operation