ARTICLES, RECEIVED BY CROSS-WEDGE ROLLING
ALL ITEMS: 62
Page 1 | Page 2 | Page 3 |
Fishplate bolt
Further surface treatment is not required
Maximum diameter – 42 mm
Length – 160 mm
Material – steel 35
Manufactured by means of cross-wedge rolling with diameter gain option
Wedge die contains section for thread rolling
Dimensional accuracy according to h12 and IT12/2
Earlier was manufactured by means of forging with further thread rolling
Shaft
Preform for further turning
Maximum diameter – 50 mm
Length – 140 mm
Material – steel 35
Dimensional accuracy according to h12 and IT12/2
Earlier was manufactured by means of turning on automatic lathe
Ball pin
Preform for further smooth finishing and turning
Maximum diameter – 42 mm
Length – 84 mm
Material – steel 40X
The method of coupling of two items with their posterior separation is applied during wedge rolling.
Dimensional accuracy according to h9 and IT12/2
Earlier was manufactured by means of forging with further turning and smooth finishing
Lever
Preform for further smooth finishing and turning
Maximum diameter – 40 mm
Length – 120 mm
Material – steel 40X
Dimensional accuracy according to h9 and IT14/2
Earlier was manufactured by means of forging with further turning and smooth finishing
Ball pin
Preform for further smooth finishing and turning
Maximum diameter – 29 mm
Length – 79,5 mm
Material – steel 40X
The method of coupling of two items with their posterior separation is applied during wedge rolling.
Dimensional accuracy according to h9 and IT14/2
Earlier was manufactured by means of forging with further turning and smooth finishing
Ball pin
Preform for further smooth finishing and turning
Maximum diameter – 25,3 mm
Length – 73 mm
Material – steel 40X
The method of coupling of two items with their posterior separation is applied during wedge rolling.
Dimensional accuracy according to h12 and IT12/2
Earlier was manufactured by means of forging with further turning and smooth finishing
Ball pin
Preform for further smooth finishing and turning
Maximum diameter – 36 mm
Length – 85 mm
Material – steel 40X
The method of coupling of two items with their posterior separation is applied during wedge rolling.
Dimensional accuracy according to h9 and IT14/2
Earlier was manufactured by means of forging with further turning and smooth finishing
Ball pin
Preform for further smooth finishing and turning
Maximum diameter – 25 mm
Length – 67 mm
Material – steel 40X
The method of coupling of two items with their posterior separation is applied during wedge rolling.
Dimensional accuracy according to h12 and IT12/2
Earlier was manufactured by means of forging with further turning and smooth finishing
Ball pin
Preform for further smooth finishing and turning
Maximum diameter – 25 mm
Length – 142 mm
Material – steel 40X
The method of coupling of two items without their posterior separation is applied during wedge rolling.
Dimensional accuracy according to h12 and IT12/2
Earlier was manufactured by means of forging with further turning and smooth finishing
Lever
Preform for further smooth finishing and turning
Maximum diameter – 33 mm
Length – 105 mm
Material – steel 40X
Dimensional accuracy according to h12 and IT14/2
Earlier was manufactured by means of turning and smooth finishing
Lever
Preform for further smooth finishing and turning
Maximum diameter – 31 mm
Length – 82 mm
Material – steel 40X
Dimensional accuracy according to h14 and IT14/2
Earlier was manufactured by means of turning and smooth finishing
Nipple
Preform for further turning
Maximum diameter – 34 mm
Length – 182 mm
Material – steel 20
Dimensional accuracy according to h12 and IT12/2
Earlier was manufactured by means of turning on automatic lathe
Nipple
Preform for further turning
Maximum diameter – 30 mm
Length – 75 mm
Material – steel 35
Dimensional accuracy according to h12 and IT12/2
Earlier was manufactured by means of turning on automatic lathe
Lance
Preform for further forging
Maximum diameter – 30 mm
Length – 222 mm
Material – steel 45
Dimensional accuracy according to h14 and IT14/2
Earlier was manufactured by means of forging
Lance
Preform for further forging
Maximum diameter – 40 mm
Length – 235 mm
Material – steel 45
Dimensional accuracy according to h14 and IT14/2
Earlier was manufactured by means of forging
Cutter body
Further surface treatment is not required
Maximum diameter – 40 mm
Length – 70 mm
Material – steel 40X
The method of coupling of two items with their posterior separation is applied during wedge rolling.
Dimensional accuracy according to h14 and IT14/2
Earlier was manufactured by means of forging with further turning
Cutter body
Further surface treatment is not required
Maximum diameter – 56 mm
Length – 202 mm
Material – steel 40X
Manufactured by means of cross-wedge rolling with diameter gain option
Dimensional accuracy according to h14 and IT14/2
Earlier was manufactured by means of forging with further turning
Cutter body
Further surface treatment is not required
Maximum diameter – 48 mm
Length – 134 mm
Material – steel 40X
Dimensional accuracy according to h12 and IT14/2
Earlier was manufactured by means of forging with further turning
Cutter body
Further surface treatment is not required
Maximum diameter – 25 mm
Length – 127 mm
Material – steel 40X
Dimensional accuracy according to h12 and IT14/2
Earlier was manufactured by means of turning
Cutter body
Further surface treatment is not required
Maximum diameter – 46 mm
Length – 77 mm
Material – steel 40X
Manufactured by means of cross-wedge rolling with diameter gain option
The method of coupling of two items with their posterior separation is applied during wedge rolling.
Dimensional accuracy according to h12 and IT14/2
Earlier was not manufactured
Cutter body
Further surface treatment is not required
Maximum diameter – 40 mm
Length – 73 mm
Material – steel 40X
The method of coupling of two items with their posterior separation is applied during wedge rolling.
Dimensional accuracy according to h12 and IT14/2
Earlier was not manufactured
ALL ITEMS: 62
Page 1 | Page 2 | Page 3 |
|
